Makita DLX2005M

The new kit from Makita the DLX2005M has arrived. This is an updated kit from Makitas DK18000. It features an impressive updated battery, standing at 4ah compared to the old kits 3Ah battery. The battery takes just 36 minutes to charge, which is little more that the 3Ah charging time of 22 minutes.

The kit contains equipped with a drill, impact wrench, case, two 18v 4Ah batteries, charger, drill bits, handle and depth gauge. The drill and impact wrench both come with battery indicators, two speed settings, 13mm chuck, forward/reverse drilling and an LED work light. The drill comes with several torque speed settings and three drilling modes: Screwdriver, Drill driver – for wood and metal and hammer – for concrete.

For more information on this kit please click here or contact us at: sales@tufftools.com

Watch a demo of the DLX2005 here: Demo

XMAS 12: DeWalt Extreme Boot

Christmas is nearly upon us and at TuffTools.com we have a great range of Christmas offers. Over the next few weeks, we will be showing you our ‘Top 4′ products in our Christmas range. This week is Number 3 in our ‘Top 4′ chart…


DeWalt Extreme Boots

This is Number 3 in our ‘Top 4′ chart, the XMS12BOOT DeWalt Extreme Boot, perfect for all the last minute jobs up to Christmas.

These Dewalt Extreme safety boots have a lightweight construction, whilst also offering high safety for the workplace. They are heat resistant to 300°, and the steel toe caps can withold up to 200 Joules.

The rubber soles are oil and slip resistant. The boots have a molded midsole to help support the foot, and a dual density removable insole, which ensures that the boots are comfortable to wear.

At TuffTools, we are able to sell these boots in sizes 7-11.

For more information on these XMS12BOOT DeWalt Boots, please click on the picture or even contact us at: sales@tufftools.com.

XMAS 12: Lighthouse Extender Torch

Christmas is nearly upon us and at TuffTools.com we have a great range of Christmas offers. Over the next few weeks, we will be showing you our ‘Top 4′ products in our Christmas range. This week is Number 4 in our ‘Top 4′ chart…

Lighthouse Double Extender Torch

This is Number 4 in our ‘Top 4′ chart, the XMS12EXTEND Lighthouse Double Extender Torch.

The new Lighthouse Double Extender rechargeable torch serves many functions in one. The torch head has 2 modes; either a spotlight or a 3 LED flashing red safety light. The torch has a swivel head, which means that it can be angled to provide light in the right place.

In addition, the torch can be extended at each end, with each end providing 15 lumens of light, meaning it can provide either a 15 or 30 lumen flood light.

The light is free-standing allowing hand-free use. It also has a magnetic bottom, so that it can be securely attached to metal objects.

For more information on these XMS12EXTEND Lighthouse Double Extender Torch, please click on the picture or even contact us at: sales@tufftools.com.

How to pick the Correct Cordless Drill

Selecting the Correct Type of Drill

By www.tufftools.comThere are 3 different types of Cordless Drill generally to choose from. The one you need will depend on the application you are using it for.
The 3 types are as follows:
1 - Drill Driver - This option is designed for drilling into wood or metal.
2 - Combi dril - This option is designed for drilling into wood, steel or masonry.
3 - SDS Hammer drill - Can be used for drilling into wood & metal although generally regarded for drilling into masonry.

Drill Drivers

www.tufftools.com

Makita BDF452RFE 18V Lithium-Ion Drill Driver
The drill driver is designed for drilling into metal and wood. This is generally a cheaper option than the combi due to having less features. In most cases the drill will have settings around the collar of the chuck, you will be able to select the drilling option or the screwdriver option depending on what job you are attempting.
Another option will be the torque settings which will adjust the strength at which the chuck will turn, for harder materials the torque can be set higher to help acheive better results.
Drill Drivers can come in cordless or corded versions.Example of a Drill Driver
Makita BDF452RFE 18V Lithium-Ion Drill Driver

 
Combi Drills

www.tufftools.com

=Makita BHP451 Combi drill

A similar design to the drill driver but with an extra option, the hammer mode. The hammer mode is for when drilling into masonry. It enables a small piston to continuously tap at the back of the chuck to give extra help to get through the masonry. The collar still has the torque settings but the extra option of drilling into more materials gives this drill a wider range of applications, therefore a higher price as well.

Examples of Combi Drills
Tufftools Combi Drills

SDS HAMMER DRILLS

www.tufftools.com

=Makita BHR202 SDS Hammer drill

The SDS Hammer drill is designed mainly for use with masonry. With a piston design like the hammer option on the combi as standard they normally have a larger drilling capacity for this application. Our most popular cordless SDS Hammer drill is the Makita BHR202RFE with a max drilling capacity in concrete of 20mm.

Example of a SDS Hammer Drill
Makita BHR202RFE 18v LXT Rotary Hammer

BATTERY TECHNOLOGY

www.tufftools.com

=Makita BL1830 Lithium battery

An important factor in cordless tools is the battery technology. The new lithium batteries now available with cordless tools make a huge difference to the run time of the machines as well as the charge time and battery life.
With a fast charger with older Ni-Cd or Ni-MH batteries you could still be looking at 30 minutes or even 60 minutes charge time, the Makita DC18RA charger for lithium batteries has a charge time of 22 minutes from flat. Add this to the fact that you could gat up to 2000 more cycles from a lithium battery compared to the older type and you can see why most professionals these days opt for lithium technology.

Example of a Drill Driver
Makita DC18RA 18V Li-ion Battery Charger

SELECTION PROCESS

www.tufftools.com

The best way of choosing the correct drill is to start with the basics. Decide on the application that you need it for, if your not going to need to drill into masonry then you don’t need a combi or SDS drill. Although if you are going to need to drill into masonry then a drill driver is not the tool for you. The application is usually the main factor in deciding on the correct tool for the job!